吴中泽

发布者：宋阳发布时间：2021-04-01浏览次数：13480

吴中泽

职称: 国家青年高层次人才、东南大学青年首席教授、教授、博士生导师

研究方向: 电动汽车驱动电机系统、高速电机系统

Email: zzwu@seu.edu.cn

办公电话: 17826068783（微信同号）




个人简介：

吴中泽，男，江苏滨海人，国家青年高层次人才、东南大学青年首席教授、教授、博士生导师，主要从事电动汽车用高性能无刷电机系统和高速电机系统的研究工作，主持国家青年高层次人才项目（海外）、国家重点研发计划课题、国家自然科学基金青年基金项目、江苏省自然科学基金青年基金项目、南京市留学人员科技创新项目（B类）各1项。指导研究生获江苏省优秀硕士学位论文、IEEE IAS Student Thesis Contest 2023 - Non-PhD 第一名。获IEEE能量转换汇刊2016-2017最佳论文奖第三名、ICEMS2022最佳会议论文奖、2023年日内瓦国际发明展银奖、CIEEC2023最佳会议论文奖、IEEE ITEC-AP2022最佳会议论文奖。


（1）受教育经历（从大学本科开始，按时间排序）

2006.9 – 2010.6，东南大学，电气工程及其自动化专业，本科

2010.9 – 2013.3，东南大学，电气工程专业，硕士

2013.4 – 2017.1，英国谢菲尔德大学，电子与电气工程专业，博士


（2）研究工作经历（按时间排序）

2017.1 – 2018.8，英国华威大学华威制造工程学院，Research Fellow

2018.8 – 2020.8，英国巴斯大学机械工程系，Prize Fellow、博士生导师

2020.8 – 2021.1，英国巴斯大学机械工程系，讲师（Lecturer）、博士生导师

2021.3至今，东南大学电气工程学院，现任东南大学青年首席教授、教授、博士生导师


（3）学术兼职

  1. IET Electric Power Applications 编委（Associate Editor）.

  2. Alexandria Engineering Journal 编委（Associate Editor）.

  3. World Electric Vehicle Journal 编委（Guest Editor）.


（4）学术成果

  1. 江苏省优秀硕士学位论文指导教师（研究生：张文韬，指导教师：花为、吴中泽、钱巍）.

  2. 东南大学优秀硕士学位论文指导教师（研究生：张文韬，指导教师：花为、吴中泽、钱巍）.

  3. 2016-2017 IEEE Transactions on Energy Conversion 最佳论文奖第3名（作者：Z. Q. Zhu, Z. Z. Wu, X. Liu）.

  4. 2016年国家优秀自费留学生奖学金.



主要科研项目：

  1. 国家青年高层次人才项目（海外）“电动汽车驱动用高性能无刷电机系统”，负责人，在研.

  2. 国家重点研发计划课题“多变工况永磁驱动电机材料与零部件关键技术及多因素耦合下电机性能提升方法”，2022YFB2502701，负责人，在研.

  3. 国家自然科学基金项目“PWM激励下电励磁磁通切换电机励磁绕组感应脉动电压产生机理及其抑制方法研究”，52107037，负责人，在研.

  4. 英国Charles Ware Morris Minor Centre公司资助研究项目“Powertrain Configuration for Classic Car Electrification”，负责人，结题.



论著：

一、电机系统领域重要期刊论文（部分）

  1. Xueyi Yan, Zhongze Wu (通讯作者), Wei Hua, Wentao Zhang, and Ming Cheng, “A mathematical model for wound field switched flux machine considering inductance harmonics of field and armature windings,” IEEE Transactions on Industry Applications, vol. XX, no. X, pp. XXXX-XXXX, XXX.-XXX. 2024. DOI: XXX. (SCI，已录用)

  2. Wentao Zhang, Zhongze Wu (通讯作者), Ying Fan, Wei Hua, and Ming Cheng, “Analysis and improvement of DC winding current dynamics in wound field switched flux machine,” IEEE Transactions on Industry Applications, vol. XX, no. X, pp. XXXX-XXXX, XXX.-XXX. 202X. DOI: 10.1109/TIA.2024.3381108. (SCI，已在线发表)

  3. Zhongze Wu (通讯作者), Lai Jin, Wei Hua, Wentao Zhang, and Ming Cheng, “Harmonics orders modelling of DC winding induced voltage pulsation in wound field switched flux machines under PWM excitation,” IEEE Transactions on Transportation Electrification, vol. XX, no. X, pp. XXXX-XXXX, XXX.-XXX. 2023. DOI: 10.1109/TTE.2023.3345361. (SCI，已在线发表)

  4. Zhongze Wu, Wentao Zhang, Ying Fan, Wei Hua, and Ming Cheng, “A transient-state lumped parameter thermal model for brushless wound field switched flux machines,” IEEE Transactions on Transportation Electrification, vol. 10, no. 1, pp. 224-238, Mar. 2024. DOI: 10.1109/TTE.2023.3253170. (SCI)

  5. Jixuan Chen, Wei Hua, Lingyun Shao, Zhongze Wu (通讯作者), Xueyi Yan, and Wentao Zhang, “Modified magnetic equivalent circuit of double-stator single-rotor axial flux permanent magnet machine considering stator radial-end flux-leakage,” IET Electric Power Applications, vol. 18, no. 2, pp. 195-207, Feb. 2024. DOI: 10.1049/elp2.12379. (SCI)

  6. Zhongze Wu, Lai Jin, Wentao Zhang, Ying Fan, Wei Hua, and Ming Cheng, “Influence of PWM excitation on DC winding induced voltage pulsation in wound field switched flux machines,” IEEE Transactions on Industry Applications, vol. 60, no. 1, pp. 460-476, Jan./Feb. 2024. DOI: 10.1109/TIA.2023.3327033. (SCI)

  7. Wentao Zhang, Zhongze Wu (通讯作者), Ying Fan, Wei Hua, and Ming Cheng, “A stable and computationally efficient spatial harmonic model for predicting the DC winding induced voltage in WFSF machine,” IEEE Transactions on Industry Applications, vol. 59, no. 4, pp. 3966-3977, Jul.-Aug. 2023. DOI: 10.1109/TIA.2023.3263163. (SCI)

  8. Wentao Zhang, Zhongze Wu (通讯作者), Wei Hua, Z. Q. Zhu, Zheng Wu, Jiapeng Hu, Ying Fan, and Ming Cheng, “Reduction of open-circuit DC winding induced voltage and torque pulsation in the wound field switched flux machine by stator axial pairing of tooth-tips,” IEEE Transactions on Industry Applications, vol. 58, no. 2, pp. 1976-1990, Mar.-Apr. 2022. DOI: 10.1109/TIA.2022.3143777. (SCI)

  9. Wentao Zhang, Wei Hua, Zhongze Wu, Guishu Zhao, Yi Wang, and Weiguo Xia, “Analysis of DC winding induced voltage in wound-field flux-switching machine with air-gap field modulation principle,” IEEE Transactions on Industrial Electronics, vol. 69, no. 3, pp. 2300-2311, Mar. 2022.

  10. Z. Z. Wu, Z. Q. Zhu, and C. Wang, “Reduction of on-load DC winding induced voltage in partitioned stator wound field switched flux machines by dual three-phase armature winding,” IEEE Transactions on Industrial Electronics, vol. 69, no. 6, pp. 5409-5420, Jun. 2022. DOI: 10.1109/TIE.2021.3094482. (SCI)

  11. H. Chuan, S. Fazeli, Z. Wu (通讯作者), and R. Burke, “Mitigating the torque ripple in electric traction using proportional integral resonant controller,” IEEE Transactions on Vehicular Technology, vol. 69, no. 10, pp. 10820-10831, Oct. 2020. DOI:10.1109/TVT.2020.3013414. (SCI)

  12. R. Burke, A. Giedymin, Z. Wu (通讯作者), H. Chuan, N. Bourne, and G. Hawley, “A lumped parameter thermal model for single sided AFPM machines with experimental validation,” IEEE Transactions on Transportation Electrification, vol. 6, no. 3, pp. 1065-1083, Sep. 2020. DOI: 10.1109/TTE.2020.2998110. (SCI)

  13. Z. Z. Wu, Z. Q. Zhu, C. Wang, J.-C. Claude, S. Personnaz, and P. Farah, “Analysis and reduction of on-load DC winding induced voltage in wound field switched flux machines,” IEEE Transactions on Industrial Electronics, vol. 67, no. 4, pp. 2655-2666, Apr. 2020. DOI: 10.1109/TIE.2019.2912779. (SCI)

  14. Z. Z. Wu, Z. Q. Zhu, W. Hua, S. Akehurst, X. Zhu, W. Zhang, J. Hu, H. Li, and J. Zhu, “Analysis and suppression of induced voltage pulsation in DC winding of five-phase wound-field switched flux machines,” IEEE Transactions on Energy Conversion, vol. 34, no. 4, pp. 1890-1905, Dec. 2019. DOI: 10.1109/TEC.2019.2938161. (SCI)

  15. Z. Z. Wu, Z. Q. Zhu, C. Wang, J.-C. Claude, S. Personnaz, and P. Farah, “Reduction of open-circuit DC winding induced voltage in wound field switched flux machines by skewing,” IEEE Transactions on Industrial Electronics, vol. 66, no. 3, pp. 1715-1726, Mar. 2019. DOI: 10.1109/TIE.2018.2838106. (SCI)

  16. Z. Z. Wu, Z. Q. Zhu, C. Wang, J.-C. Claude, S. Personnaz, and P. Farah, “Influence of DC winding configuration on its induced voltage in wound field machines,” IEEE Transactions on Energy Conversion, vol. 33, no. 4, pp. 1825-1836, Dec. 2018. DOI: 10.1109/TEC.2018.2846567. (SCI)

  17. Zhongze Wu, Z. Q. Zhu, and Hanlin Zhan, “Comparative analysis of partitioned stator flux reversal PM machine and magnetically geared machine operating in stator-PM and rotor-PM modes,” IEEE Transactions on Energy Conversion, vol. 32, no. 3, pp. 903-917, Sep. 2017. DOI: 10.1109/TEC.2017.2693028. (SCI)

  18. Z. Z. Wu, and Z. Q. Zhu, “Analysis of magnetic gearing effect in partitioned stator switched flux PM machines,” IEEE Transactions on Energy Conversion, vol. 31, no. 4, pp. 1239-1249, Dec. 2016. DOI: 10.1109/TEC.2016.2590988. (SCI)

  19. Z. Z. Wu, and Z. Q. Zhu, “Comparative analysis of end effect in partitioned stator flux reversal machines having surface-mounted and consequent pole permanent magnets,” IEEE Transactions on Magnetics, vol. 52, no. 7, pp. 1-4, Jul. 2016, Art. ID 8103904. DOI: 10.1109/TMAG.2016.2521698. (SCI)

  20. Z. Z. Wu, Z. Q. Zhu, and H. L. Zhan, “Comparative analysis of partitioned stator flux reversal PM machines having fractional-slot non-overlapping and integer-slot overlapping windings,” IEEE Transactions on Energy Conversion, vol. 31, no. 2, pp. 776-788, Jun. 2016. DOI: 10.1109/TEC.2016.2525826. (SCI)

  21. Z. Z. Wu, and Z. Q. Zhu, “Partitioned stator flux reversal machine with consequent-pole PM stator,” IEEE Transactions on Energy Conversion, vol. 30, no. 4, pp. 1472-1482, Dec. 2015. DOI: 10.1109/TEC.2015.2448796. (SCI)

  22. Z. Z. Wu, and Z. Q. Zhu, “Analysis of air-gap field modulation and magnetic gearing effects in switched flux permanent magnet machines,” IEEE Transactions on Magnetics, vol. 51, no. 5, pp. 1-12, May 2015, Art. ID 8105012. DOI: 10.1109/TMAG.2015.2402201. (SCI，谷歌学术引用273次)

  23. Z. Z. Wu, Z. Q. Zhu, and J. T. Shi, “Novel doubly salient permanent magnet machines with partitioned stator and iron pieces rotor,” IEEE Transactions on Magnetics, vol. 51, no. 5, pp. 1-12, May 2015, Art. ID 8105212. DOI: 10.1109/TMAG.2015.2404826. (SCI)


二、授权发明专利

  1. 花为, 张文韬, 吴中泽, 丁石川, 一种电励磁磁通切换电机转矩脉动和感应电压削弱方法, 中国发明专利，授权时间: 2022年4月5日, 专利号: ZL 2020 1 0649901.9.

  2. 花为, 吴中泽, 曹平, 自容错磁通切换永磁电机, 中国发明专利，授权时间: 2013年8月21日, 专利号: ZL 2011 1 0173452.6.

  3. 花为, 吴中泽, 俞贤萍, 开关磁阻电机调速系统的转子角度细分方法, 中国发明专利，授权时间: 2013年4月24日, 专利号: ZL 2011 1 0333722.5.

  4. 花为, 吴中泽, 程明, 一种磁通切换型发电机, 中国发明专利，授权时间: 2012年5月30日, 专利号: ZL 2010 1 0554978.4.

  5. 花为, 华浩, 吴中泽, 程明, 一种双速绕组开关磁阻电机, 中国发明专利，授权时间: 2015年6月3日, 专利号: ZL 2013 1 0036804.2.

  6. 花为, 柯海波, 吴中泽, 程明, 一种混合动力汽车用电子无级调速系统, 中国发明专利，授权时间: 2013年1月2日, 专利号: ZL 2011 2 0416694.9.


教学：

  1. 电气工程学院，大二上学期，《电磁场》（2021 –）.

  2. 自动化学院，大三上学期，《电动汽车新技术（研讨）》（2021 –）.

  3. 电气工程学院，研一下学期，《电机系统综合实践》（2024 –）.

  4. 电气工程学院，暑期学校，《电机实习》（2021 – 2023）.

  5. 在英国巴斯大学机械工程系任教期间，主讲电动汽车电驱动系统相关课程.


人才培养：

在读博士生：张文韬、张天翔.

在读硕士生：严雪怡、陈纪轩（协助指导）、付二方.

已毕业硕士生：

  1. 张文韬（副导师）：2021年6月硕士毕业，江苏省优秀硕士学位论文、IEEE IAS Student Thesis Contest 2023 - Non-PhD第一名、东南大学优秀硕士学位论文，毕业去向：东南大学电气工程学院读博.

  2. 金来（副导师）：2024年6月硕士毕业，毕业去向：国网江苏省电力有限公司常州供电分公司.



每年招收硕士生2~3名，博士生1~2名。欢迎具有电气工程、自动化、数学等背景，对电机系统研究方向感兴趣的同学报考研究生，加入科研团队，一起开展研究工作！团队为学生提供美国、英国等顶尖海外名校交流、深造、联合培养机会。长期招募电机系统方向博士后，待遇从优。